concealed holsters

8/13/2005 8:46:38 PM I just ordered the LT Scope Mount for the Surefire from Grant.(West Bridgewater, MA) – The matter of Atlantic Research Marketing Systems, Inc. v Austin Precision Products, Inc. d/b/a LaRue Tactical, United States District Court for the District of Massachusetts, Civil Action No. 1:09-cv-10034(DPW), was settled and dismissed with prejudice. LaRue Tactical has taken a fully paid up, royalty free license under U.S. Trademark Registration Nos. 3,466,163 and 3,478,909.

I am looking to get 225 dollars shipped for the site. This is 15 dollars less then if you bought it online at most reputable stores.

The package consists of:

-The Trijicon MS03 mini red dot sight
-Trijicon Marked Hard cover for sight
-Alan Wrench
-Mini dot zeroing dial
-Trijicon Marked Pelican case.

MDracer76 5/4/2011 11:09:19 PM Originally Posted By USMC6337: Originally Posted By WarthogA5: Is it ok to put a mag extension on an Benelli M2 Accessories with a field stock under 922r? If not there sure are a lot of snow goose hunters that could get popped. And just about every 3-gunner using an Benelli M2 [...]

5/21/2009 1:27:32 AM EST shameful bump… really no one? SuperSet72 5/21/2009 1:44:26 AM EST Not out yet and won’t start shipping until July, according to EOTech. the1000z 5/21/2009 2:26:06 AM ESTBy SuperSet72: Not out yet and won’t start shipping until July, according to EOTech. funny, OpticsPlanet has the things on sale… GackMan 5/21/2009 2:48:10 AM EST It looks like it wil solve some problems with the battery compartment/contacts, give it a smaller foot print, and use a common battery (CR123… (more…)

5/21/2009 1:27:32 AM EST
shameful bump… really no one?
SuperSet72
5/21/2009 1:44:26 AM EST
Not out yet and won’t start shipping until July, according to EOTech.
the1000z
5/21/2009 2:26:06 AM ESTBy SuperSet72:
Not out yet and won’t start shipping until July, according to EOTech.

funny, OpticsPlanet has the things on sale…
GackMan
5/21/2009 2:48:10 AM EST
It looks like it wil solve some problems with the battery compartment/contacts, give it a smaller foot print, and use a common battery (CR123 – same as surefire strapped to the rail of the rifle so only 1 kind of spare battery to carry).

Could be a nice improvement.

but I want to get my hands on one to play with. I’ve seen thm on opticsplanet, midwayusa and SKD but I didn’t see them actually in stoc anywhere.

Also, want to see some 3rd party mounts for them.

) on their website?

docHOLLOWAY: any of you guys have one thinking about getting one, how do they perform? do you guys like em?

docHOLLOWAY:
any of you guys have one
thinking about getting one, how do they perform? do you guys like em?

Aimpoint Magnifier Shooting Targets

Aimpoint CompM2 The Aimpoint Compm2, also known as the M68/CCO (when used by U.S. forces), is the standard sight for the U.S. Army, the U.S. Air Force, and the armed forces of many NATO countries. Designed for extreme conditions – submersible to 25 meters The Aimpoint CompM2 is ready for use around the clock due [...]

I’ve been looking for other domestic parts for the Benelli M2 Accessories to make sure that I am in compliance StrangerDanger 2/25/2011 9:50:16 PM Yes, but Misinfo was spoken by someone else. So it should be corrected. How many imported parts does the Benelli M2 Accessories have? Anyone ask the BATF? I can see adding a Surefire forend, follower and one of the Mesa Tactical Urbino. MDracer76 2/26/2011 11:15:14 PM Originally Posted By StrangerDanger: Yes, but Misinfo was spoken by someone else. So it should be corrected. How many imported parts does the Benelli M2 Accessories have? Anyone ask the BATF? I can see adding a Surefire forend, follower and one of the Mesa Tactical Urbino. ahh.. sorry.. missed that.. Thanks for the good info! MDracer76 3/1/2011 1:36:48 PM Bump to see in anyone else has any recomendations on US Made parts for a Benelli M2 Accessories MDracer76 3/5/2011 5:22:25 PM forgot to add a pic. leid 3/5/2011 10:18:45 PM Originally Posted By MDracer76:

: 0-0-0 : 6/5/2011 3:19:49 Thanks guys. I am digging through my stuff thinking I had a 1″ QD mount around here somewhere, but I must have sold/traded it. Guess I will have to order one. The Hippie Clown will bring them down!! ArmedPete 1* Gold Contributor Team Jan 2009 USA WI, USA 1964 : 0-0-0 : 6/5/2011 3:59:55 Originally By jmt1271: Thanks guys. I am digging through my stuff thinking I had a 1″ QD mount around here somewhere, but I must have sold/traded it. Guess I will have to order one. Order up a LaRue Tactical mount and a Troy flip up rear sight and you are stilll only spending what that Rifle Scope normally goes for. You will be rocking a badass set up! Can’t wait to see pics! Be courteous and kind to everyone you meet, but have a plan to kill them quickly if necessary. “As I lay Rubber down the street, I pray for traction I can keep, but if I spin and begin to slide, please dear God protect my ride.” -Amen jmt1271 &%@# HIPPIES Bronze Contributor Team Feb 2004 USA MO, USA 11611 : 0-0-0 : 6/5/2011 4:22:11 Originally By ArmedPete: Originally By jmt1271: Thanks guys. I am digging through my stuff thinking I had a 1″ QD mount around here somewhere, but I must have sold/traded it. Guess I will have to order one. Order up a LaRue Tactical mount and a Troy flip up rear sight and you are stilll only spending what that Rifle Scope normally goes for. You will be rocking a badass set up! Can’t wait to see pics! I may do so. Before I drop the coin on a 1″ LaRue Tactical QD I am going to go ahead and get my hands on the optic. The Hippie Clown will bring them down!! CJan_NH Blissfully ignorant Colt KoolAid drinker… Bronze Contributor Team Jul 2003 USA NH, USA 10366 : 0-0-0 : 6/5/2011 4:33:41 If I’m not mistaken LaRue Tactical makes inserts that will allow you to use your

Eotech
The tritium in the RX30 is guaranteed for 15yrs. I’ve heard of the clear tube that protects the fiber optics on older ACOGs eventually cracking over time & needing replacement but I’ve never heard of that on any of their Trijicon Reflex sights and even if the protective cover cracks that doesn’t affect the efficiency of the fiber optics themselves. Biggest downside to the RX30 (IMHO) is that you can still experience reticle washout under certain lighting conditions but it’s harder to achieve than w/earlier Trijicon Reflex versions. I wouldn’t run the RX30 w/o BUIS to cover such an eventuality (w/the RX30 you run BUIS to cover rare lighting conditions and w/other RDS you run BUIS to cover optic failure due to bad batteries, broken switch, etc). HTH, keep us posted!… Tomac Rock501 1/25/2010 1:58:17 PM Originally Posted By Tomac: I’ve owned & used both. If size/weight are critical then the T-1 should be at the top of your list w/typical aimpoint ruggedness & insane battery life. However, I find the 20mm tube makes the dot difficult to locate when shooting from awkward positions w/sloppy cheekweld. The RX30 is very forgiving of sloppy cheekweld due to the huge FOV through the 42mm objective and is very KISS w/no batteries, switches, electronics or adjustments to worry about. yeah as a matter of fact, even when using my M4s on a LaRue Tactical mount ive found that getting a quick target aquisition/cheek weld is something ive had to work at and pratice because of either a helmet strap or a neck gaiter or something…… really, mounting on the AR-15 platform is all im really worried about, i seem to recall seeing one mounted on a LaRue Tactical mount as well. did i? GySgtD 1/25/2010 2:35:49 PM AFAIK, LaRue Tactical does not make mounts for the Reflex. I have to hide my ARMS mount while at the range. Out of embarrassment… autumnsong 1/25/2010 2:39:18 PM TOMAC nailed it with his answer so I will just add a few things as I have both sights. The T-1 obviously weighs alot less and is alot smaller. No way around it. The RX30 is about the size and weight of a reversed AA version Eotech. If you want your rifle to be super light go with the T-1. IMO the RX30 is faster and is more forgiving in weird positions. Thats right, I said it…. For me, it is faster to get on target. The RX30 has a bigger dot, but to my eyes, the dot is much more crisp than the dot on the T-1. I also think that the huge yellow/orange color reflective glass on the RX30 appears to be a bit more prone to damage than on a T-1. If it had a killflash I think this problem would be unimportant. I have never scratched or broken the glass on my RX30, but it just looks like it would be easier to have a issue. YMMV. Rock501 1/25/2010 4:11:41 PM well this all pretty much answers my question as far as which one to pick, i think im going to go with the RX30 for this reason above all others…..if im putting it in the closet to use for home defense then i want the fastest most forgiving Trijicon Reflex i can put on it, i will never compromise the safety of my wife or myself. that being said, the only issue that i have to worry about (simply due to lack of knowledge) is cheek weld, like i said earlier i run a M4s on my main gun and sometimes with that i have problems getting a good quick target acquired due to chin straps, neck gaiter, shemagh etc. anyways, what would would be the ideal way to mount this? and is there any thing i need to look for….like the RX30 or RX30a model? BigCoastie 1/25/2010 4:22:03 PM The 42mm Trijicon Reflex use a TA51 which is a normal Trijicon ACOG mount so I’m sure you can find a ton of different mounts for it Rock501 1/25/2010 4:30:54 PM Originally Posted By BigCoastie: The 42mm Trijicon Reflex use a TA51 which is a normal Trijicon ACOG mount so I’m sure you can find a ton of different mounts for it well then if it uses a TA51 then u can use a LaRue Tactical Trijicon ACOG mount with it then…………..right? autumnsong 1/25/2010 6:43:14 PM I am pretty sure the ARMS #15 mount is a specific mount for the Trijicon Reflex sight. Someone will be along shortly to correct me if I am wrong. My RX30 has the ARMS#15 dual throw lever mount. It is good mount and I have had no problems. One thing to note though. For sighting in, the elevation and windage screws adjust what feels like a spring mounted base that attaches to the #15 mount. If I try hard I can move the sight in its mount a little by twisting. It has always returned to zero, but it is kind of odd. I have never heard of anyone else having problems with this style mount either. If you read some of the previous posts about it by Tomac, he explains this better than I can. Rock501 1/25/2010 11:01:38 PM Originally Posted By autumnsong: I am pretty sure the ARMS #15 mount is a specific mount for the Trijicon Reflex sight. Someone will be along shortly to correct me if I am wrong. My RX30 has the ARMS#15 dual throw lever mount. It is good mount and I have had no problems. One thing to note though. For sighting in, the elevation and windage screws adjust what feels like a spring mounted base that attaches to the #15 mount. If I try hard I can move the sight in its mount a little by twisting. It has always returned to zero, but it is kind of odd. I have never heard of anyone else having problems with this style mount either. If you read some of the previous posts about it by Tomac, he explains this better than I can. ive got an ATN LTAD on another carbine that works on the same mounting principal, its odd yah like u said but i like it and yah it holds zero real well. ok so ive figured this much out……………. they make the RX30 with a RX30 with a TA-51 mount the same mounting platform used in the TA31H and LaRue Tactical just so happens to make a mount for the TA31H which leads me to the conclusion through deductive reasoning and an evening beer that this is going to be one kick ass Trijicon Reflex set up Tomac 1/25/2010 11:07:52 PM Originally Posted By autumnsong: I also think that the huge yellow/orange color reflective glass on the RX30 appears to be a bit more prone to damage than on a T-1. If it had a killflash I think this problem would be unimportant. I have never scratched or broken the glass on my RX30, but it just looks like it would be easier to have a issue. YMMV. A killflash is available for the RX30 but it’s so pricey ($100+) that I haven’t gotten the nerve up yet to buy one for testing! Tomac autumnsong 1/25/2010 11:24:06 PM Originally Posted By Tomac: Originally Posted By autumnsong: I also think that the huge yellow/orange color reflective glass on the RX30 appears to be a bit more prone to damage than on a T-1. If it had a killflash I think this problem would be unimportant. I have never scratched or broken the glass on my RX30, but it just looks like it would be easier to have a issue. YMMV. A killflash is available for the RX30 but it’s so pricey ($100+) that I haven’t gotten the nerve up yet to buy one for testing! Tomac The largest I have seen is for a 40mm scope. It was inexpensive and I thought I might pick it up to see if I could make a insert so it would fit. Haven’t got around to trying it yet though. I also wonder if the killflash would make the (minor) washout problem go away since it would somewhat darken the view. Rock501 1/27/2010 8:41:41 PM GOT IT! just won the ebay auction http://offer.ebay.com/ws/eBayISAPI.dll?ViewBids&item=320479482639 socommatthews 1/27/2010 10:37:08 PM Wow $305 plus $125 for the LT-100 mount and you got a kick ass setup for $430. Good job. Rock501 1/27/2010 11:06:14 PM thanks i have to be honest i was so proud of my little purchase i just had to share cant wait to really start puttin this gun together I have a ta31f with the Trijicon 8 moa red dot mounted on it. I was trying to set the red dot at 50 yards. Trying to save ammo, I decided us the the Trijicon ACOG as a sighting reference since it is already zeroed (at 100 yards). Since I spent all day the day before yesterday zeroing the Trijicon ACOG and have a really good idea of where the POI would be at 50 yards, I figured I could just move the red dot closer to where the estimated POI was going to be and go from their. The red dot was really low, so I put it is far up on the reticle as possible and it still seems to be between approximately a foot to two feet too low at 50 yards and about a foot at 25 yards. I talked to Trijicon ‘s very helpful CS and they told me that I would probably need a spacer (ms26). I looked at the spacer on their website and I don’t think it will be enough to help. The red dot seems to be very low on the reticle. By the time I got home Trijicon was closed so I can’t call them until tomorrow. Am I missing something? Is it something I’m doing wrong or not understanding? I thought maybe 50 yards is too far but the red dot is still low at 25 yards. Maybe something is wrong with the red dot? I thought the washer would fix it until I noticed the red dot is so low that it is barely above the fiber optic on the acog. Are they supposed to be that way?

The downside on mine is the up/down elevation adjustment does not have positive clicks like the windage. My expectations for it were not high considering the price. Seems like a solid scope. I have not tried those Trijicon scopes though I am an Trijicon ACOG guy. Maybe one day. mrnuke7175 6/30/2008 10:36:05 AM I have a Millet DMS1 and have no fisheye issues. It’s the best I can think of for the price. Only wish it’d be lighter. With the flattop mount and rings it’s well over 1.5lbs. Otherwise, to me, it works like anEotechat 1x, and an Trijicon ACOG at 4x. Derek45 9/9/2008 10:38:55 PM TR21 is much better quality Joguwa86 9/10/2008 1:57:58 AM Originally Posted By Derek45: TR21 is much better quality Agreed. It’s hard not to overlook that. The BAC feature on the Trijicon AccuPoint is an excellent thing to have, as well. I would take the Trijicon AccuPoint in a heartbeat, even it if it is $300 more. HotDiggity 9/10/2008 12:32:59 PM I also like the feature on the TR21 where you can reset the trurets to “zero” after zeroing the weapon. Much easier to make field adjustments that aren’t intended to be permanent. RunsWithScissors 9/10/2008 1:20:31 PM This a crazy question. TR-21, Amber… If I could justify the purchase.

kcolg30: kcolg30 regularly visits their website and transfers monies via CC to the great people in TX. In turn they ship me perfection items. kcolg30 and other members support LaRue Tactical due to their great customer service and outstanding products. LaRue Tactical is good people. Aye MTUSA 8/4/2011 2:53:11 PM Second to none. Every transaction I have done with them has been perfect. Great prices and great products.
Eotech

Mesa Tactical

Anyone actually tried one? It seems like a good fit for what I want. foxherb536/24/2009 7:09:12 PM Had one for years and it’s my go to sight. I had the first gen sight and broke it (the housing was carbon fiber, new ones are Aluminum) and Trijicon replaced it free several years after I bought it. I keep batt. in it but never really use them. I like the TriPower better than my AimPoint… agillig6/24/2009 7:37:05 PM foxherb53: Had one for years and it’s my go to sight. I had the first gen sight and broke it (the housing was carbon fiber, new ones are Aluminum) and Trijicon replaced it free several years after I bought it. I keep batt. in it but never really use them. I like the TriPower better than my AimPoint… Thanks for the response. I’ve heard people say that when its sunny outside its hard to find the chevron. Any truth to that? Martens6/24/2009 7:55:40 PM I’ve got one on my patrol rifle. I do run the batteries at night just because my rifle light is so bright that the reticle washes out at times. As for bright sunny days, it is the only optic I have used that I haven’t been able to get it to wash out. I even had an aimpoint wash out a couple of times for me at max brightness. I like the chevron as it is the crispest reticle I have every seen. I like it as it seems like the best blend of size for speed and a fine aiming point for precision. HermanSnerd6/24/2009 9:24:07 PM If any of you Tri Power owners could post a pic of the reticle during daylight use,

Shooting Targets –

Mossberg 500 Accessories – With all things in consideration, we still buy both, but I choose the Aimpoint for plain and simple reliability. Full-Auto Harv24 2/9/2008 9:11:51 AM FULL_AUTO Battery life is an important decision if you are using the weapon for duty / defense / combat. What we see routinely is that the optic [...]

The quality of the aluminum unit and mounting hardware are excellent; the delrin strip is the only flaw. BlindFaith429 7/1/2010 8:25:44 AM CJan_NH, I think I just creamed my jeans. I have always been a fan of the M3, well, Benellis in general, but i always liked the M3. You are a lucky man to [...]

Troy Police confiscate sawed-off
TROY — Two men were arrested for a host of charges including possession of a sawed off

Police: Man Threatens Woman With
Louisville Metro Police arrested a man Sunday night after a dispute over a parking spot. According to arrest records, a woman was sitting in her car, partially parked in a handicapped parking spot in the 500 block of Lilly Avenue. Police said 48 …

AK 47 Scope Mount

Link To This Post
Blog User Blog
Media Media Collections
EE Feedback 100% (2)
Posted: 10/9/2011 3:17:29 PM EST
[Last Edit: 10/9/2011 3:21:22 PM EST by DanTSX]
There really isn’t a bad SKS Rifle Stocks unless dome dumb hick dragged it through the TAPCO catalog. They are fun guns to shoot. Every gun owner should have one.

$295 is pretty fair in today’s market for a norinco. You can find them for slightly less, but it will take lots of time and persistence to save $30-$50.

[NO TEXT]
User Info
c
Email User
Reply
Quote
Report
Aptrgangr
Bronze Contributor

Joined: Mar 2010
TX,

Posts: 1366
Link To This Post
Blog User Blog
Media Media Collections
EE Feedback 0% (0)
Posted: 10/9/2011 4:45:48 PM EST
GLNIC: Was a company incorporated in Los Angeles, California in May of 1986. They were reportedly an import company owned exclusively by the PLA. Guangdon Lingnan Ind.

no=175 http://i764.photobucket.com/albums/xx282/jaston87/Guns/RecceSPR1.jpg i was going to post this link. Harris Bipod / LaRue is all i run. hotbiggun42 6/13/2010 12:11:44 PM Originally Posted By BiggerStick47: Originally Posted By hotbiggun42: Get the Tango Down very light weight and solid .I believe there is a good deal on one in the EE. The Tango Down is NOT [...]

no=175 http://i764.photobucket.com/albums/xx282/jaston87/Guns/RecceSPR1.jpg i was going to post this link. Harris Bipod / LaRue is all i run. hotbiggun42 6/13/2010 12:11:44 PM Originally Posted By BiggerStick47: Originally Posted By hotbiggun42: Get the Tango Down very light weight and solid .I believe there is a good deal on one in the EE. The Tango Down is NOT light @ 16+ ounces. And the one you “believe” is on EE happens to be yours……AR15 newbie here. Can someone tell me how the Harris Bipod mounts to an AR15. The ad says it mounts to any rifle with O.D. studs. I just bought an Alexander Arms Beowulf 50 Overwatch. The upper has two little studs sticking out of the bottom of it with holes through them. Is that what O.D. studs are?

Pro Ears Chosen #1 by Field & Stream Thomas McIntyre in a ‘Head to Head’ Column for the June 2006 issue of Field & Stream Magazine picked Pro Ears by RidgeLine, inc as the Best Electronic hearing protection Protection/Amplification System. Read More Bow Tube Video Critique of hearing protection Amplification Wade Nolan reports on the Pro-Ears Gold and finds they are a leg up on the old style competition. See Pro Ears in action Customer Feedback “I won a set of Pro Mag Gold muffs at the Rocky Mountain 300 prize table last weekend.

Shooting Targets Surefire – MSP AR-15 Accessories, Scope Mounts & RingsPrecision and Tactical Surefire: from MSP – Mounting Solutions Plus Firearm Accessories and Scope Mounts & Rings. Products for shooters designed and tested by shooters Talkin’ to America: Charles Heller speaks about “Project GunWalker” Charles Heller, on his Liberty Watch Radio talks about his analysis [...]

Shooting Targets

Surefire – MSP AR-15 Accessories, Scope Mounts & Rings
Precision and Tactical Surefire: from MSP – Mounting Solutions Plus Firearm Accessories and Scope Mounts & Rings. Products for shooters designed and tested by shooters

Talkin’ to America: Charles Heller speaks about “Project GunWalker”
Charles Heller, on his Liberty Watch Radio talks about his analysis of BATFE’s “Operation Fast & Furious,” which has turned into “Project GunWalker,” supplying guns used in Mexico to murder, including one U.S. Agent, and probably there’ll be another.

AR-15 Stock

aimpoint comp ml3 – AR-15 Stock – Shooting Targets As cameras and facial recognition software become more pervasive it might become desirable for ordinary citizens to take steps to avoid being caught on camera. ITProPortal reports that a New York designer has developed a So we decided to take one apart my problem is besides [...]

aimpoint comp ml3 –

AR-15 Stock –

Shooting Targets

As cameras and facial recognition software become more pervasive it might become desirable for ordinary citizens to take steps to avoid being caught on camera. ITProPortal reports that a New York designer has developed a

So we decided to take one apart my problem is besides placeing a wtb add where else can we get a Complete EOTech that does not work hopefully a millitary model since those are the ones we here about the most but at this point any will do. And if possible where can i get a Aimpoint without the mount same description as the EOTech. Thats news to me. Other than a bad batch of terminals and people using cheap shitty batteries that is, Ive had 4 none of them gave me issues. ETA 1 of them had spent its life getting the shit beat out of it on a 12ga shooting 3.5″ turkey shells. ishoot2live Stay in a Round Room You’ll Never get Cornered Platinum Contributor Team Nov 2002 USA NV, USA Instructor 7070 : 0-0-0 : 5/27/2011 7:41:51 T I’ve had my EOT 512 for four years, and it still works fine and holds Zero (after a shit-ton of abuse). Maybe I got lucky. LDES Jul 2010 USA USA 148 : 0-0-0 : 5/27/2011 8:08:21 T mine work fine. had them now for years…love them. Policetacteam Nov 2005 USA IA, USA 910 : 0-0-0 : 5/27/2011 9:22:54 T I’ve been using them for 12 years now without a single issue! I’ve been through multiple models and all were mounted on patrol rifles and were used in extreme heat, cold, and rain! They are good to go! No optic is without some issues…Aimpoint and Trijicon included. Don’t believe everything you read on the internet! fuzzy03cls May 2009 USA FL, USA 2569 : 0-0-0 :

AR-15 Stock